Products

GT-630 copper connecting tube is a straight-through jointing sleeve used to connect two copper cable ends by compression. The model has a 45 mm outer diameter, a 35 mm inner diameter and an overall length of 170 mm. Its open-ended tubular construction allows conductors to be inserted from both sides before compression with a suitable crimping tool and die set.

Before ordering, check the actual conductor dimensions, conductor material and the die set used for installation. Do not select the product solely by its model number. Provide the required model, quantity and cable information for dimensional verification and a suitable quotation.

GT-500 copper connecting tube is a passing-through connector designed for joining two conductor ends in a straight-line connection using a suitable crimping method. The product has a copper tubular body with an outside diameter D of 38 mm, an inside diameter d of 30 mm and an overall length L of 150 mm.

Before ordering, check the actual conductor dimensions, conductor material, crimping tool and die set. Do not select the connector by model name alone. Send Trường Phát the required model, quantity and delivery information for specification checking and a quotation.

The GT-400 copper connecting tube is a straight through-type connector used to join two copper cable ends by compression. This model has an outer diameter D of 34 mm, an inner diameter d of 26 mm and an overall length L of 130 mm. Its tubular construction allows the two prepared conductors to be inserted from opposite ends before compression with a compatible crimping tool and die.

Before ordering, check the actual conductor dimensions, cable material, die model and operating range of the crimping tool. Do not select the connector only by the cable’s overall outside diameter. Send the model, quantity and cable details to Truong Phat for specification checking and quotation support.

The GT-300 copper connecting tube is a passing-through sleeve designed for inline cable jointing by compression. Its open tubular structure allows conductors to be inserted from opposite ends before the connection is compressed with a compatible tool and die. The model is identified by its catalogue dimensions, which should be checked against the actual conductor and the selected installation equipment.

Before ordering, compare the tube dimensions with the conductor, compression die and crimping tool used on site. Send Trường Phát the model, required quantity and cable details for product selection support and a quotation.

GT-240 copper connecting tube is a through type copper connector designed for connecting suitable copper cables in electrical installation works. This model belongs to the GT Copper Connecting Tube (Passing Through Type) series, with dimensions of D 26mm, inner diameter d 21mm and length L 108mm according to the product catalog.

Before installation, check the cable cross-section and connection requirements to select the suitable connecting tube. Contact Truong Phat for consultation based on your cable specifications and quantity requirements.

GT-185 copper connecting tube is a straight-through sleeve designed to join two 185mm² copper cable conductors by crimping. According to the catalog, the product has a 24 mm outer diameter, 19 mm inner diameter and 100 mm overall length.

Before installation, verify the cable cross-sectional area and actual conductor diameter against the tube bore, then select a compatible crimping tool and die. Do not use this copper tube to connect aluminum conductors directly. Contact Trường Phát with the required model, quantity and cable details for specification checking and quotation support.

GT-150 copper connecting tube is a straight, pass-through connector designed to join two compatible copper cable ends by crimping. According to the dimensional table, the connector has a 22mm outer diameter, a 17mm inner diameter and an overall length of 94mm.

Before selection, compare the actual conductor diameter with the 17mm internal bore instead of treating the nominal cable cross-section as the conductor diameter. The conductor material, connector condition, crimping tool and die compatibility should also be checked before installation. Send the GT-150 model, cable details and required quantity to Truong Phat for specification checking and quotation support.

GT-120 Copper Connecting Tube is a through-type tubular connector designed to join two conductor ends using a suitable crimping method. According to the supplied dimensional chart, model GT-120 has an outer diameter D of 19mm, an inner diameter d of 15mm and an overall length L of 90mm.

Before selection, compare the actual conductor diameter with the 15mm internal bore and use a compatible crimping tool and die. Do not determine the suitable cable size from the model number alone. Submit the conductor type, actual core dimensions and required quantity for specification checking and quotation.

GT-95 Copper Connecting Tube is a passing through type copper cable connector used for electrical cable connection applications. This product belongs to the GT Copper Connecting Tube series, model GT-95, with technical dimensions including outer diameter D 18 mm, inner diameter d 14 mm and length L 81 mm.

Contact Truong Phat for consultation on selecting suitable cable connection accessories.

GT-70 copper connecting tube, full catalog number GT-1-70, is a passing-through straight connector designed for inline cable joints. According to the supplied dimensional table, the product has a 16 mm outer diameter, 12 mm inner diameter and 78 mm overall length.

• Catalog number: GT-1-70
• Design: Passing-through connecting tube
• Outer diameter D: 16 mm
• Inner diameter d: 12 mm
• Overall length L: 78 mm

GT-50 copper connector is a through-type straight connecting tube designed to join two copper cable ends with a suitable nominal cross-sectional area of 50mm² by crimping. The model shown in the dimensional table is GT-1-50, with an outer diameter D of 13mm, an inner diameter d of 10mm and a length L of 70mm.

• Model: GT-50
• Suitable cable cross-sectional area: 50mm²
• Outer diameter D: 13mm
• Inner diameter d: 10mm
• Length L: 70mm

GT-35 Copper Connecting Tube
⚡ GT-35 Copper Connecting Tube features an outer diameter of 11mm and inner diameter of 8mm
🏭 Overall tube length: 63mm, suitable for 35mm² copper cables
🛡️ Through-type construction allows easy positioning of both cable ends before crimping
🔧 Installed using a hydraulic crimping tool with the correct 35mm² die
📦 Multiple GT copper connector sizes are available for switchboards, factories, and projects
👉 Contact Truong Phat for stock checking, quotations, and suitable crimping die recommendations.

TRUONG PHAT ELECTROMECHANICAL EQUIPMENT COMPANY LIMITED
📍 No. 47, Adjacent Area 26, Van Phu Urban Area, Phu La, Ha Dong, Hanoi, Vietnam
📞 Hotline:

• 0983.607.668 – Zalo Sales 1

• 0964.602.568 – Zalo Sales 2

• 0984.345.846 – Zalo Sales 3

• 0869.685.636 – 24/7 Support

GT-25 Copper Connector Genuine
🔋 Suitable conductor size: 25mm²
⚡ GT-25 copper connector made from T2 copper with Cu content ≥ 99.9%
🏭 Reference dimensions: d = 7.1mm, D = 10mm, L = 60mm
🛡️ Through-hole design allows two cable ends to meet at the center of the tube
🔧 Installed using a mechanical or hydraulic crimping tool with the correct die size
📦 Suitable for switchboards, power cable systems and industrial electrical installations
👉 Contact Truong Phat to check availability and receive the latest GT-25 copper connector quotation. TRUONG PHAT ELECTROMECHANICAL EQUIPMENT COMPANY LIMITED
📍 No. 47, Adjacent Area 26, Van Phu Urban Area, Phu La, Ha Dong, Hanoi, Vietnam
📞 Hotline:

• 0983.607.668 – Zalo Sales 1

• 0964.602.568 – Zalo Sales 2

• 0984.345.846 – Zalo Sales 3

• 0869.685.636 – 24/7 Support

GT-16 Copper Connector Genuine 
🔋 Suitable for 16 mm² copper conductors
⚡ Made from T2 copper with Cu ≥ 99.9% for stable conductivity
🏭 Through-hole design allows cable insertion from both ends
🛡️ Reference dimensions: d = 6.1 mm; D = 9.0 mm; L = 56 mm
🔧 Installed using compatible mechanical or hydraulic crimping tools
📦 The GT-16 copper connector is suitable for switchboards, power cables and industrial electrical systems
👉 Contact Truong Phat for stock availability, crimping-die advice and a competitive quotation.

TRUONG PHAT ELECTROMECHANICAL EQUIPMENT COMPANY LIMITED
📍 No. 47, Block 26, Van Phu Urban Area, Phu La, Ha Dong, Hanoi, Vietnam
📞 Hotline:

• 0983.607.668 – Zalo Sales 1

• 0964.602.568 – Zalo Sales 2

• 0984.345.846 – Zalo Sales 3

• 0869.685.636 – 24/7 Support

GT-10 Copper Connector 
🔋 Designed to connect two 10mm² copper cable ends
⚡ GT-10 copper connector with a 5.3mm inner diameter
🏭 8.0mm outer diameter and 50mm overall length
🛡️ Manufactured from T2 copper tube with Cu ≥ 99.9%
🔧 Installed using a mechanical or hydraulic crimping tool with a 10mm² die
📦 Suitable for switchboards, power cable systems and industrial electrical installations
👉 Contact Truong Phat to confirm stock availability and receive a GT-10 quotation.

TRUONG PHAT ELECTROMECHANICAL EQUIPMENT COMPANY LIMITED
📍 No. 47, Adjacent Area 26, Van Phu Urban Area, Phu La, Ha Dong, Hanoi, Vietnam
📞 Hotline:

• 0983.607.668 – Zalo Sales 1

• 0964.602.568 – Zalo Sales 2

• 0984.345.846 – Zalo Sales 3

• 0869.685.636 – 24/7 Support

ANDELI ADB3-63DC DC Circuit Breaker 50A Genuine | Reliable 500V DC Protection
🔋 50A C50 DC circuit breaker, suitable for medium DC branch protection.
⚡ 500V DC, 2P, designed for direct current electrical systems.
🏭 Suitable for solar PV, battery systems, DC panels, EV applications and industrial projects.
🛡️ 6000A breaking capacity, supports safe isolation during DC short-circuit faults.
🔧 Quick installation on 35mm DIN rail, compact 2-module design for control cabinets.
📦 Genuine product, CO-CQ documents available upon customer request.
👉 Contact for fast quotation:

📞 Technical consultation hotline:

• 0974.815.509 – Zalo
• 0869.685.636 – Technical Support

ANDELI ADB3-63DC DC Circuit Breaker 40A Genuine | Reliable Protection For 500V DC Systems
🔋 40A - C40 DC circuit breaker 40A, suitable for DC branch circuits, battery banks and DC panels.
⚡ 500V DC - 2P, C tripping curve, 6000A rated breaking capacity.
🏭 Suitable for solar PV, DC cabinets, battery systems, EV auxiliary circuits and industrial projects.
🛡️ Designed according to GB/T10963.2 and IEC 60898-2, with CCC and CE certification.
🔧 Quick DIN 35mm rail mounting, compact 2-module design for electrical cabinets.
📦 Genuine product, CO-CQ documents available upon customer request.
👉 Contact for fast quotation:

📞 Technical hotline:

• 0974.815.509 – Zalo
• 0869.685.636 – Technical Support

ANDELI ADB3-63DC 32A DC Circuit Breaker Official | Reliable 500VDC Protection
🔋 32A C32, suitable for DC branch circuits, battery cabinets and solar PV systems.
⚡ 500V DC, 2P DC MCB technology for disconnecting both poles safely.
🏭 Suitable for solar PV, battery systems, DC cabinets and industrial projects.
🛡️ 6000A breaking capacity helps isolate overcurrent and short-circuit faults.
🔧 Quick DIN 35mm rail mounting, compact 2-module width for electrical panels.
📦 Genuine product, CO-CQ documents available upon customer request.
👉 Contact us for a fast quotation:

📞 Technical consultation hotline:

• 0974.815.509 – Zalo
• 0869.685.636 – Technical Support

20A DC Circuit Breaker ANDELI ADB3-63DC Genuine | 500V DC Protection
🔋 20A C20, 2P, suitable for disconnecting both poles in DC circuits.
⚡ 500V DC, Icn 6000A, DC MCB technology according to IEC 60898-2.
🏭 Suitable for solar PV, battery banks, DC panels, EV systems and industrial projects.
🛡️ T4 energy limiting class helps reduce thermal impact during short-circuit faults.
🔧 Quick installation on 35mm DIN rail, compact 2-module design.
📦 Genuine product, CO-CQ documents available upon customer request.
👉 Contact for fast quotation:

📞 Technical consultation hotline:

• 0974.815.509 – Zalo
• 0869.685.636 – Technical Support

ANDELI ADB3-63DC C10 Genuine | 10A DC MCB for DC Panels
🔋 2P - 10A, protects both poles in direct current circuits.
⚡ 500V DC - Icn 6000A, C curve for common DC loads.
🏭 Suitable for solar PV, batteries, DC panels, electric vehicles and industrial projects.
🛡️ Energy limiting class T4, compliant with GB/T10963.2 and IEC 60898-2.
🔧 Quick DIN rail 35mm installation, compact 2-module structure for electrical panels.
📦 Genuine product, CO-CQ documents available upon customer request.
👉 Contact us for a fast quotation:

📞 Technical consultation hotline:

• 0974.815.509 – Zalo
• 0869.685.636 – Technical Support

🔋 1NO + 1NC, suitable for Start/Stop contactor control circuits
⚡ Ø22mm, quick installation on panel doors, push button boxes and control desks
🏭 Illuminated dual push button for motors, pumps, conveyors and industrial machines
🛡️ Ag silver-alloy contacts, utilization category AC-15 / DC-13
🔧 Yellow LED options: 24V / 220V / 380V according to control voltage
📦 Mechanical life approx. 1,000,000 operations, momentary spring-return mechanism
👉 Contact Truong Phat for the correct APBB-22&25N illuminated dual push button configuration.

TRUONG PHAT ELECTROMECHANICAL EQUIPMENT COMPANY LIMITED
📍 No. 47, Lot 26, Van Phu Urban Area, Phu La, Ha Dong, Hanoi, Vietnam
📞 Hotline:

• 0983.607.668 – Zalo Sales 1

• 0964.602.568 – Zalo Sales 2

• 0984.345.846 – Zalo Sales 3

• 0869.685.636 – 24/7 Support

LA38 Green 22mm Non Illuminated Push Button.
🔋Ø22mm flat-head push button,
⚡ Rated data: Ui 440V, Ith 10A, suitable for AC-15 / DC-13 control circuits
🏭 Used for control panels, pumps, conveyors, motors, relay-contactor circuits
🛡️ Silver alloy contacts, 1NO + 1NC, mechanical life about 1,000,000 operations
🔧 Front protection IP40, quick installation on standard Ø22mm panel cut-out
📦 Please confirm whether the required operation is maintained/latching or momentary before ordering
👉 Contact Truong Phat for pricing and technical support on the 22mm non illuminated push button.

CÔNG TY TNHH THIẾT BỊ CƠ ĐIỆN TRƯỜNG PHÁT
📍 Số 47, Liền kề 26, KĐT Văn Phú, Phú La, Hà Đông, Hà Nội
📞 Hotline:

• 0983.607.668 – Zalo KD1

• 0964.602.568 – Zalo KD2

• 0984.345.846 – Zalo KD3

• 0869.685.636 – 24/7 Support

LA38 22mm Illuminated Push Button
🔋AC 220V LED for quick visual status indication
⚡ 22mm Illuminated Push Button
🏭 Standard Ø22mm panel mounting, suitable for control cabinets and industrial machines
🛡️ Silver alloy contacts, mechanical life approx. 1,000,000 operations
🔧 Optional 1NO + 1NC contact module, easy LED wiring via X1-X2 terminals
📦 Technical support for selecting the right 22mm illuminated push button by voltage and circuit function
👉 Contact Truong Phat for a fast quotation on LA38 green 22mm Illuminated Push Button.

CÔNG TY TNHH THIẾT BỊ CƠ ĐIỆN TRƯỜNG PHÁT
📍 Số 47, Liền kề 26, KĐT Văn Phú, Phú La, Hà Đông, Hà Nội
📞 Hotline:

• 0983.607.668 – Zalo KD1

• 0964.602.568 – Zalo KD2

• 0984.345.846 – Zalo KD3

• 0869.685.636 – 24/7 Support

Ắc Quy 12V 40Ah NPP Chính Hãng – Thông Số, Ứng Dụng, Báo Giá

• Điện áp danh định 12V, dung lượng 40Ah
• Công nghệ AGM kín khí, hạn chế bảo trì
• Phù hợp cho UPS, báo cháy, an ninh, viễn thông
• Độ tự xả thấp, tuổi thọ thiết kế cao

👉 Liên hệ ngay để được tư vấn chọn đúng ắc quy 12V 40Ah NPP phù hợp hệ thống sử dụng

0974.815.509 – Zalo

DTL-2-25 Bi-Metal Lug 2 Holes 25mm2 – Secure Copper to Aluminum Cable Connection

• Suitable for 25mm2 aluminum cable connection to copper terminals
• 2-hole design for stronger fixing and anti-rotation
• Helps reduce galvanic corrosion between aluminum and copper
• Ideal for electrical panels, busbars, MCCB, ACB, substations

👉 Contact us now for technical support and fast quotation on the right DTL-2 bi-metal lug for your installation

NPP NP2-1000Ah 2V 1000Ah Battery

• Nominal voltage 2V, capacity 1000Ah
• Sealed AGM technology, low maintenance
• Compact size, easy to install in UPS and electrical cabinets
• Low self-discharge, stable performance
• Suitable for UPS, fire alarm, emergency lighting, and telecom systems

👉 Contact us now for technical advice and the right NPP NP12-1000Ah 2V 1000Ah battery selection based on your load and backup time requirements.

NPP NP12-9Ah 12V 9Ah Battery for UPS, Fire Alarm, Emergency Light

• Nominal voltage 12V, capacity 9Ah
• Sealed AGM technology, low maintenance
• Compact size, easy to install in UPS and electrical cabinets
• Low self-discharge, stable performance
• Suitable for UPS, fire alarm, emergency lighting, and telecom systems

👉 Contact us now for technical advice and the right NPP NP12-9Ah 12V 9Ah battery selection based on your load and backup time requirements.

NPP NP12-90Ah 12V 90Ah Battery

• 12V 90Ah AGM VRLA battery for stable backup power
• Maintenance-free design, low self-discharge
• Suitable for UPS, telecom, security, medical, and industrial systems
• Compact structure, reliable standby service life

👉 Contact us now for technical consultation and the right battery solution for your backup power system.

NPP NP12-80Ah 12V 80Ah Battery – For UPS, Telecom & DC Power Systems

• 12V nominal voltage, 80Ah rated capacity
• Sealed AGM technology, maintenance-free design
• Up to 10 years design life
• Low self-discharge, ideal for standby systems
• Suitable for UPS, telecom, fire alarm, medical devices, and DC power cabinets

👉 Contact us now for technical support and the right NPP NP12-80Ah battery solution for your actual backup time requirements

NPP NP12-7Ah Battery – 12V 7Ah AGM Battery for UPS & Fire Alarm

• 12V nominal voltage and 7Ah rated capacity
• AGM sealed lead-acid design, maintenance-free
• Compact size, suitable for UPS, fire alarm, and backup systems
• Low self-discharge and stable standby performance

👉 Contact us now for technical support and the right NP 12V 7Ah NPP battery solution for your system

NPP 12V 60Ah AGM Battery – For UPS, Telecom & Industrial Backup Power

• 12V 60Ah battery suitable for many backup power systems
• Sealed AGM technology for stable operation and low maintenance
• Low self-discharge rate of around 3% per month at 25°C
• Ideal for UPS, telecom, fire alarm, medical, and industrial electrical systems

👉 Contact us now for technical support and the right NPP 12V 60Ah battery recommendation for your actual load demand.

Genuine NPP 12V 55Ah Battery

• 12V voltage, 55Ah capacity, suitable for many backup power systems
• Sealed AGM technology, stable operation, low maintenance
• Low self-discharge, around 3% per month at 25°C
• Ideal for UPS, fire alarm, telecom, medical equipment, and power stations

👉 Contact us now for technical advice on choosing the right NPP 12V 55Ah battery for your actual load and backup time requirements.

NPP 12V 50Ah Battery – Stable Backup Power, Durable and Safe

• Rated voltage: 12V
• Rated capacity: 50Ah
• AGM sealed lead-acid design
• Suitable for UPS, fire alarm, security, telecom, and backup power systems
• Low self-discharge and reliable long-term standby performance

👉 Contact us for technical support and the right battery selection for your system.

NPP 12V 45Ah Battery – Stable

• Rated voltage: 12V
• Rated capacity: 45Ah
• AGM sealed lead-acid design
• Suitable for UPS, fire alarm, security, telecom, and backup power systems
• Low self-discharge and reliable long-term standby performance

👉 Contact us for technical support and the right battery selection for your system.

NPP 12V 35Ah Battery NP12-35Ah – Specifications, Applications & Features

• Rated voltage: 12V
• Rated capacity: 35Ah
• AGM sealed lead-acid design
• Suitable for UPS, fire alarm, security, telecom, and backup power systems
• Low self-discharge and reliable long-term standby performance

👉 Contact us for technical support and the right battery selection for your system.

Centrifugal Fan Impeller

• High airflow and pressure performance
• Stable operation, low vibration and noise
• Multiple materials: stainless steel, steel, plastic
• Suitable for ventilation, dust extraction systems

👉 Contact us now for fast consultation and correct selection